Mon. Dec 11th, 2023

In the old days, no special attention was paid to fabric inspection. Today, the trend is changing in a very systematic way. Textile companies focus on fabric inspection before buying or selling any finished product. On average, 20% of malfunctions are associated with fabric defects. This highlights the importance of fabric inspection in the textile market.

Keep reading this till the end to know the amazing aspects.

What is Fabric Inspection?

Initially, the Inspection is a process in which the visual identification of failures or non-conformities is seen at a glance. It is essential to verify the quality of raw materials or finished products.

The inspection type is Fabric Inspection. And in this, the fabric is inspected to check its quality. Because if there is a defect in the cloth, it is of no use to anyone.

Inspecting the fabric helps to understand its color, weight, pattern, and other aspects. To measure the quality of the fabric. Obtain impeccable and high-quality finished products.

Fabric Defects:

There are many flaws, but most of them are:

The main defect of the woven fabric is the wicks, holes, lack of thread, bad thread, toe, and many others.

Knitting faults include needle lines, mixed thread, thread variation, bar, and more.

Rules for Identifying Defects:

There are some definite rules for refusing a handkerchief.

1. A hole or tear is considered a major defect.

2. It is unbearable to allow improper fabric construction and weight.

3. Tightness, undulations, and others in the fabric are not accepted.

4. Reject the part with a full-width defect over six inches long.


Therefore, it plays a vital role in a textile-buying house. In addition, it is essential for decision-making in the textile business. To buy raw fabrics or sell finished yields.

These days, Textile Unlimited leads as a one-stop solution for fabric inspection. The textile market is evaluating its performance. In addition, they meet the needs of their customers and market trends.

Systematic Approach:

There are three Systematic Ways Used to Inspect a Fabric.

• 4-point system

• 10-point system

• 2.5 point system

The most common is a 4-point system. Also, each time an error occurs, they are assigned some points based on their length.

General Fabric Inspection Process:

• Fabric inspection performed in a safe environment with adequate lighting and ventilation.

• The speed of the fabric in the inspection machine must be greater than 15 yards per minute.

• The evaluation of textiles such as fabrics is done according to the weight against the standard weight.

• Each defect must be highlighted during the Inspection of the fabric.

• According to the inspector, the fabric that passes through the frame must have angles between 45 and 60 degrees. This is done under 2 F96 cool white lights over the viewing area.

In one Word:

Fabric is an important material, and it must be of superior quality. For this, inspecting the fabrics by the textile-buying house is necessary. Therefore, you must visit Textile Unlimited, a leading all-in-one home inspection solution.


By admin